SMBX2 PAL Release - Feedback, Questions and Bugs here!

Share and discuss custom LunaLua code and content packs for SMBX2.
Smashhacker
Shy Guy
Shy Guy
Posts: 5
Joined: Sat Oct 08, 2016 5:14 pm

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Smashhacker » Tue Apr 02, 2019 4:49 pm

Apparently Wario can't properly dismount from a Yoshi because he ground pounds back onto the same Yoshi unless there is a platform just above him.

User avatar
PROX
Boom Boom
Boom Boom
Posts: 1758
Joined: Sun Jul 06, 2014 8:50 pm
Chat Username: PROX

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby PROX » Tue Apr 02, 2019 5:01 pm

Electriking wrote:
Tue Apr 02, 2019 4:29 pm
PROX wrote:
Tue Apr 02, 2019 4:22 pm
The podoboos are very janky. For some reason, no matter what I do, the height of the podoboos don't increase. No matter which number I put it at, it stays at the same height.
The height the podoboo jumps at is how high you place it above the lava. Unless fixed height is used.
ok, but why do the numbers exist then?
I believe and I accept Jesus Christ as my Lord and Savior. If you do, put this in your signature.

If it makes sense then it must make dollars

Youtube Channel: ProxyHax O.O

My Project (No logo yet): viewtopic.php?f=90&t=18321&start=20

My Graphics Pack:
Image

World Map Pack: viewtopic.php?f=31&t=20173

User avatar
Electriking
Posts: 4356
Joined: Mon Jun 06, 2016 4:32 pm
Flair: I have NO idea what to put here
Current Project: Something
Chat Username: ElectriKing
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Electriking » Tue Apr 02, 2019 5:04 pm

PROX wrote:
Tue Apr 02, 2019 5:01 pm
Electriking wrote:
Tue Apr 02, 2019 4:29 pm
PROX wrote:
Tue Apr 02, 2019 4:22 pm
The podoboos are very janky. For some reason, no matter what I do, the height of the podoboos don't increase. No matter which number I put it at, it stays at the same height.
The height the podoboo jumps at is how high you place it above the lava. Unless fixed height is used.
ok, but why do the numbers exist then?
For when you want the podoboo to have a fixed height independent of where you place it reletive to the lava.
Well, at least that is probably how it should work. But it seems to just jump 4 blocks no matter what.
SMM2 ID: JJF-P7G-FSF

User avatar
64searchman46
Pokey
Pokey
Posts: 211
Joined: Sun Feb 22, 2015 4:38 pm
Flair: Flair
Current Project: Dimension X; GFX Pack
Chat Username: kborg
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby 64searchman46 » Tue Apr 02, 2019 5:47 pm

Just wondering, levels/episodes can be easily transferred from Beta 3 to the new Beta 4 pre-release, correct? Or is it recommended to keep Beta 3 along side this build?

EDIT: At the moment, Windows Defender won't allow me to install the new build. Any ways to fix this?

EDIT 2: Never mind, got it to work.
Image

Discord server: https://discord.gg/dMTvpva
Discord username: kborg#5607
Switch friend code: SW-0765-3487-6690
Youtube: https://www.youtube.com/channel/UCnIJoT ... subscriber

I support:
Spoiler: show
ImageImage
Image
Image
Image
Image

User avatar
PROX
Boom Boom
Boom Boom
Posts: 1758
Joined: Sun Jul 06, 2014 8:50 pm
Chat Username: PROX

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby PROX » Tue Apr 02, 2019 7:31 pm

Electriking wrote:
Tue Apr 02, 2019 5:04 pm
PROX wrote:
Tue Apr 02, 2019 5:01 pm
Electriking wrote:
Tue Apr 02, 2019 4:29 pm


The height the podoboo jumps at is how high you place it above the lava. Unless fixed height is used.
ok, but why do the numbers exist then?
For when you want the podoboo to have a fixed height independent of where you place it reletive to the lava.
Well, at least that is probably how it should work. But it seems to just jump 4 blocks no matter what.
yeah, which is why I was confused before, but at least that cleared things up. thx
I believe and I accept Jesus Christ as my Lord and Savior. If you do, put this in your signature.

If it makes sense then it must make dollars

Youtube Channel: ProxyHax O.O

My Project (No logo yet): viewtopic.php?f=90&t=18321&start=20

My Graphics Pack:
Image

World Map Pack: viewtopic.php?f=31&t=20173

User avatar
Quantumenace
Mega Mole
Mega Mole
Posts: 292
Joined: Mon Dec 28, 2015 2:17 am

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Quantumenace » Tue Apr 02, 2019 9:34 pm

Potions aren't working correctly, the section keeps defaulting to 1. The editor doesn't even save/load the value correctly for the potion in the grass container.

ZombieGenius
Goomba
Goomba
Posts: 1
Joined: Tue Apr 02, 2019 9:50 pm
Flair: hey
Chat Username: ZG

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby ZombieGenius » Tue Apr 02, 2019 9:54 pm

Checkerboard-ed objects taller than 1 tile vertically appear above where they should.
Spoiler: show
ImageImage

User avatar
AirShip
Ninji
Ninji
Posts: 893
Joined: Wed Jan 01, 2014 1:30 am
Flair: The Flying Ghost
Current Project: viewtopic.php?f=90&t=22332
Chat Username: AirSheep
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby AirShip » Wed Apr 03, 2019 10:44 am

For some reason, custom elements doesn't appear in-game for me:
Spoiler: show
Image
My SMBX2 is installed on C:\, as recommended, and here the files:
Spoiler: show
Image
Image
Any solution ?

Image


Image


User avatar
SimixF1
Koopa Troopa
Koopa Troopa
Posts: 21
Joined: Wed Apr 03, 2019 8:10 am
Flair: Alice
Chat Username: SimixF1

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby SimixF1 » Wed Apr 03, 2019 10:48 am

When i hit Chuck and the inertia send me to the SMW goal (i don't touch any key), an Debug "invalid NPC-Pointer" error message appears. :(

Graham
Shy Guy
Shy Guy
Posts: 9
Joined: Wed Jan 08, 2014 3:10 pm

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Graham » Wed Apr 03, 2019 11:01 am

Hello, this update got me to fire up SMBX again. I've messed around with Lua before this though, and I have a few questions.

Are there other patches currently planned for this release? I remember hearing talk that this most recent patch was going to be the last one.

Would it be useful when reporting bugs if we propose a fix to the bug when we notice them - even if the bug itself is rather simple?

For instance, the bug in which bouncing on a stunned and invincible chuck awards points could be fixed by dropping the following code into chucks.lua at line 146 (right below where the culprit's xspeed is set on onNPCHarm).
Spoiler: show

Code: Select all

local v = pnpc.wrap(v);
local data = v.data._basegame;
if data.hurt then
	SFX.play(2);
	eventObj.cancelled = true;
end
Otherwise, thank you guys so much for your hard work - I'm having a lot of fun with this release!

User avatar
timocomsmbx2345
Ninji
Ninji
Posts: 825
Joined: Sat Feb 06, 2016 1:44 pm
Current Project: i dont even know anymore. . . .
Chat Username: same as my username
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby timocomsmbx2345 » Wed Apr 03, 2019 12:21 pm

So what are all these dummy NPCs?
SMBX 2.0 β4 is here!!! How about 2.0 β5?
ImageImage
Image
Meepyglobix wrote:DON'T SAY "38A??". OR I'll SHOOT YOU.
Spoiler: show
Image Thanks Pixelpest!!!!
Image
Image

User avatar
Electriking
Posts: 4356
Joined: Mon Jun 06, 2016 4:32 pm
Flair: I have NO idea what to put here
Current Project: Something
Chat Username: ElectriKing
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Electriking » Wed Apr 03, 2019 12:40 pm

timocomsmbx2345 wrote:
Wed Apr 03, 2019 12:21 pm
So what are all these dummy NPCs?
NPCs for your own personal use (excluding those outside the 751-1000 range) on a per level/episode basis.
SMM2 ID: JJF-P7G-FSF

User avatar
Hoeloe
Grinder
Grinder
Posts: 1067
Joined: Sat Oct 03, 2015 6:18 pm
Flair: The Codehaus Girl
Current Project: A2XT Episode 2

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Hoeloe » Wed Apr 03, 2019 1:17 pm

Electriking wrote:
Wed Apr 03, 2019 12:40 pm

NPCs for your own personal use (excluding those outside the 751-1000 range) on a per level/episode basis.
Dummy NPCs that are outside the 751-1000 ID range should not be used under any circumstances.

The NPCs between 751 and 1000 are left blank so that custom episode and level code can create their own NPCs. NPCs outside that range are slots that haven't been used yet, but will be in future versions of SMBX2, which means if you do use them, your level or episode will immediately be incompatible with future versions.

Make sure, if you're making custom NPCs, to only use IDs between 751 and 1000.

User avatar
SimixF1
Koopa Troopa
Koopa Troopa
Posts: 21
Joined: Wed Apr 03, 2019 8:10 am
Flair: Alice
Chat Username: SimixF1

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby SimixF1 » Wed Apr 03, 2019 1:47 pm

AirShip wrote:
Wed Apr 03, 2019 10:44 am
For some reason, custom elements doesn't appear in-game for me:
Spoiler: show
Image
My SMBX2 is installed on C:\, as recommended, and here the files:
Spoiler: show
Image
Image
Any solution ?
Same problem. :(

User avatar
Hoeloe
Grinder
Grinder
Posts: 1067
Joined: Sat Oct 03, 2015 6:18 pm
Flair: The Codehaus Girl
Current Project: A2XT Episode 2

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Hoeloe » Wed Apr 03, 2019 1:52 pm

SimixF1 wrote:
Wed Apr 03, 2019 1:47 pm
AirShip wrote:
Wed Apr 03, 2019 10:44 am
For some reason, custom elements doesn't appear in-game for me

Any solution ?
Same problem. :(
This happens due to an error during installation. You may need to reinstall the engine.

User avatar
SimixF1
Koopa Troopa
Koopa Troopa
Posts: 21
Joined: Wed Apr 03, 2019 8:10 am
Flair: Alice
Chat Username: SimixF1

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby SimixF1 » Wed Apr 03, 2019 2:11 pm

Hoeloe wrote:
Wed Apr 03, 2019 1:52 pm

This happens due to an error during installation. You may need to reinstall the engine.
I installed it 3 times.

For example: In "Mario challenge", before i can play it in the engine, an error appears.

This is the initial part of the error window:
Spoiler: show
Debug


==> worlds/Mario Challenge/hub/luna.lua:73: invalid path 'nil' passed
to loadimage.

User avatar
Smibbix
Spiny
Spiny
Posts: 40
Joined: Fri Apr 06, 2018 10:47 pm
Current Project: I can't tell you just yet, but let's just say it's pretty funkatronic...
Chat Username: Smibbix

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Smibbix » Wed Apr 03, 2019 2:14 pm

Huh.

Image
cat planet cat planet cat planet!!!

I Support:
Spoiler: show
Image

Image
Haha, wrong forum.
Great Quotes:
Spoiler: show
Pop Yoshi Bros wrote: These used other people levels withouth their permission? I don't know if it's wrong if the big heads of the forums make it
Enjl wrote:
Sun Jul 15, 2018 8:27 am
The only palette people care about is the SMB3 palette.
smbx GaMERDoG wrote:
Thu Jul 12, 2018 1:30 am
These tomatoes weren't debugged properly!
Horikawa Otane wrote: Image

User avatar
Hoeloe
Grinder
Grinder
Posts: 1067
Joined: Sat Oct 03, 2015 6:18 pm
Flair: The Codehaus Girl
Current Project: A2XT Episode 2

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Hoeloe » Wed Apr 03, 2019 2:24 pm

SimixF1 wrote:
Wed Apr 03, 2019 2:11 pm
I installed it 3 times.

For example: In "Mario challenge", before i can play it in the engine, an error appears.
This suggests you may not be installing it in a location where the engine has full permissions. Installing the game in Program Files, or directly into the C: drive, may cause issues like this.

User avatar
SimixF1
Koopa Troopa
Koopa Troopa
Posts: 21
Joined: Wed Apr 03, 2019 8:10 am
Flair: Alice
Chat Username: SimixF1

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby SimixF1 » Wed Apr 03, 2019 3:12 pm

Hoeloe wrote:
Wed Apr 03, 2019 2:24 pm

This suggests you may not be installing it in a location where the engine has full permissions. Installing the game in Program Files, or directly into the C: drive, may cause issues like this.
Ok, I tried again. This time it works.

But, it is possible to solve this problem? Because Beta 3 doesn't have this kind of problem. I have installed Beta 3 anywhere, but it doesn't give me any problems.

User avatar
Cedur
Blue Yoshi Egg
Blue Yoshi Egg
Posts: 5166
Joined: Tue Jun 28, 2016 10:14 am
Flair: Save climate, cut fridays for whole-week future
Current Project: various playthroughs and tests

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Cedur » Wed Apr 03, 2019 3:47 pm

Simple feedback: I prefer the old toolbar icons in PGE over the new ones, as the latter are more blurry and less pretty.
Image
More Supports: show

Image
Image

Still using the legacy editor? Get SMBX2 and PGE, it will improve your experience significantly. Here's why.

iphtechnologies wrote: NEO super mario world x is a really nice game. This Episode is 2,7 GB large at the moment.That`s crazy!
Please find similar post:
[ads]


Return to “LunaLua”

Who is online

Users browsing this forum: No registered users and 1 guest