Page 1 of 1

Acid Factory Tileset

Posted: Thu Jun 13, 2019 4:01 pm
by Enjl
Originally made for Pyro's MAGLX3 level, but since she didn't finish it I can post it publically. Wahoo!

Includes:
- The Tileset:TM:
- The acid BGOs you can overlay with the tileset for a Different:TM: Look:TM:
- Water:TM:... Or is it?
- 2 Sizeables:TM:
- Some rad as heck PIPES:TM::TM::TM:
- 4 semisolids
- 4 Spikes

SMBX2 only!

Click the image below to download
Image

Re: Acid Factory Tileset

Posted: Thu Jun 13, 2019 4:28 pm
by FireyPaperMario
This exclusive tileset made for SMBX 2.0 reminds me of a castle version of Chemical Plant zone for some reason

Re: Acid Factory Tileset

Posted: Thu Jun 13, 2019 4:49 pm
by MECHDRAGON777
This actually looks super rad. Not a fan of the background use, but still phenomenal work as always. The tiling of the floor/wall being glass makes me like this even more.

Re: Acid Factory Tileset

Posted: Fri Jun 14, 2019 3:05 pm
by PROX
oooooh this looks super neat, I like the blue use!

Re: Acid Factory Tileset

Posted: Fri Jun 14, 2019 5:10 pm
by MECHDRAGON777
While using the tileset, I noticed a few of the blocks appear to be rotated 180° which makes them not line up. (Specifically the corner pieces on the ceiling.) Upside Down spike + the acid inside seems to not be aligned or it could have just been me not understanding how to use that.

Edit: Version with and without the acid fill. I know this is an easy fix, just thought I should point it out.
Image

Re: Acid Factory Tileset

Posted: Fri Jun 14, 2019 5:48 pm
by Sarge
Enji your graphics never fail to amuse me. Would you mind if I recolored it to be more purple for use in my project? You know I'd give credit and I'd never upload it as my own.

Re: Acid Factory Tileset

Posted: Fri Jun 14, 2019 6:21 pm
by Enjl
Go nuts. Colour it rainbows if you need to. I've updated the download link with a fix to what mechdragon pointed out.

Re: Acid Factory Tileset

Posted: Fri Jun 14, 2019 7:16 pm
by MECHDRAGON777
Downloaded the fix and the ↓ pointing spike's fill acid does not seem to actually go all the way up still. On top of that, the White line used for the glare does not fully extend to where the acid would be. Reference image is the same as above, just isolated to specific parts. (I can provide said fix if need be for the white glare)

Edit: Found another thing which is easy to fix and I can see how it happened. While importing the sheet, it appears you copied one too many pixels on the bottom and not on the top.
Image from the level I am working on: show
Image
Tile in question: show
Image
Edit 2: This is a fix for two of the issues further.

Re: Acid Factory Tileset

Posted: Sat Jun 15, 2019 7:00 pm
by Enjl
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
Downloaded the fix and the ↓ pointing spike's fill acid does not seem to actually go all the way up still.
The acid doesn't go all the way up on ANY of the four spikes. That's intentional.
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
On top of that, the White line used for the glare does not fully extend to where the acid would be
The what where? I'm checking all the tiles and can't find it.
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
Found another thing which is easy to fix
Fixed.

Re: Acid Factory Tileset

Posted: Sat Jun 15, 2019 9:18 pm
by MECHDRAGON777
Enjl wrote:
Sat Jun 15, 2019 7:00 pm
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
Downloaded the fix and the ↓ pointing spike's fill acid does not seem to actually go all the way up still.
The acid doesn't go all the way up on ANY of the four spikes. That's intentional.
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
On top of that, the White line used for the glare does not fully extend to where the acid would be
The what where? I'm checking all the tiles and can't find it.
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
Found another thing which is easy to fix
Fixed.
I)The acid in the down facing spike looks weird when it does not touch the top of the spike to me. Though if you say that is intentinal, not my place to critizie it.
II)The white pixels can be seen in my first screenshot.
III)Noted

Re: Acid Factory Tileset

Posted: Sat Jun 15, 2019 10:45 pm
by PROX
MECHDRAGON777 wrote:
Sat Jun 15, 2019 9:18 pm
Enjl wrote:
Sat Jun 15, 2019 7:00 pm
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
Downloaded the fix and the ↓ pointing spike's fill acid does not seem to actually go all the way up still.
The acid doesn't go all the way up on ANY of the four spikes. That's intentional.
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
On top of that, the White line used for the glare does not fully extend to where the acid would be
The what where? I'm checking all the tiles and can't find it.
MECHDRAGON777 wrote:
Fri Jun 14, 2019 7:16 pm
Found another thing which is easy to fix
Fixed.
I)The acid in the down facing spike looks weird when it does not touch the top of the spike to me. Though if you say that is intentinal, not my place to critizie it.
II)The white pixels can be seen in my first screenshot.
III)Noted
Oh yeah, I see it. It's the white pixels on the top right corner piece in his screenshot. It's off by 2 pixels.

Re: Acid Factory Tileset

Posted: Sun Jun 16, 2019 4:09 am
by Enjl
Oh THERE, now I see it. I'll fix it in a minute, thanks.

Re: Acid Factory Tileset

Posted: Thu Jun 20, 2019 2:09 am
by MegaDood
I'm a bit unfamiliar to this, so please excuse my lack of knowledge. How come these graphics are exclusive to SMBX2? I thought graphics could be used for 1.3, 2.0, 1.4, etc.

Re: Acid Factory Tileset

Posted: Thu Jun 20, 2019 3:03 am
by Electriking
MegaDood wrote:
Thu Jun 20, 2019 2:09 am
I'm a bit unfamiliar to this, so please excuse my lack of knowledge. How come these graphics are exclusive to SMBX2? I thought graphics could be used for 1.3, 2.0, 1.4, etc.
Not if their IDs are above what is available in other versions, or if they have functions that don't work in other versions.

Re: Acid Factory Tileset

Posted: Thu Jun 20, 2019 4:14 am
by Enjl
A quick download will reveal the use of background-n.txt files, as well as nonstandard sizeable scale (4x3) which is exclusive to smbx2

Re: Acid Factory Tileset

Posted: Sat Jun 22, 2019 9:17 pm
by MegaDood
I like the somewhat psychedelic green present with the pipes and the water. The cabinet in the background is a nice touch too. Well done.