Page 1 of 1

Problem with a custom graphic

Posted: Fri Jan 24, 2020 8:13 am
by Kingbowser112
Hello everybody!
Today I report you a problem with a custom graphic I'm trying to "make".
The idea of that is to make a standard SMB3 Dry Bones replacing to Bully (npc-168).
Little gem are the Dry Bone's red eyes.
Anyway I've got problem with the Npc's code (I gather). So here's it what going on:
Spoiler: show
Image
Image
Image
Maybe I err with the code, maybe not... I dunno...
So, has anyone got a solution about it?

To understand something more here's the test's folder with level included: https://www.dropbox.com/sh/us4le2sghihh ... sqXoa?dl=0

Re: Problem with a custom graphic

Posted: Fri Jan 24, 2020 10:11 am
by DrMekar
In the First Image it uses wrong height and width defenitions. Try to raise and lower height and width. Also try with
and without gfxoffset. The Second and Third Image show a simple GIF Problem. Converting it to a PNG and making the
BG transparent should fix the problem.

If it still isen't working I can take a close look at it once I finish my playable Uncle Broadsworth Custom.. :)

Re: Problem with a custom graphic

Posted: Fri Jan 24, 2020 12:32 pm
by Kingbowser112
DrMekar wrote:
Fri Jan 24, 2020 10:11 am
In the First Image it uses wrong height and width defenitions. Try to raise and lower height and width. Also try with
and without gfxoffset. The Second and Third Image show a simple GIF Problem. Converting it to a PNG and making the
BG transparent should fix the problem.

If it still isen't working I can take a close look at it once I finish my playable Uncle Broadsworth Custom.. :)
Well, I greatly thank you homie!
I'll take your advices and I'll try again the test level.
If the problem persists, I will let you know via PM (as usal) ;)

Re: Problem with a custom graphic

Posted: Fri Jan 24, 2020 1:31 pm
by DrMekar
Kingbowser112 wrote:
Fri Jan 24, 2020 12:32 pm
DrMekar wrote:
Fri Jan 24, 2020 10:11 am
In the First Image it uses wrong height and width defenitions. Try to raise and lower height and width. Also try with
and without gfxoffset. The Second and Third Image show a simple GIF Problem. Converting it to a PNG and making the
BG transparent should fix the problem.

If it still isen't working I can take a close look at it once I finish my playable Uncle Broadsworth Custom.. :)
Well, I greatly thank you homie!
I'll take your advices and I'll try again the test level.
If the problem persists, I will let you know via PM (as usal) ;)
No Problem :) . Hope you solve your problem quicker than mine :?